Available from the Model Cellar are these beautiful figures of airmen from WW1. They
are very well detailed not only in their facial expressions but their clothing as
well. These figures are definitely worth the expense and once painted would certainly
compliment any WW1 diorama. Check their web site for other figures in other scales.
The most scary thing about bi-planes, the rigging. Not as hard as you think, easy
An independent review of new released products which have been made available to
Suitable and adaptable to 1:32 scale WW1 aircraft models. Check out this website
for the full range of nuts/bolts/washers/spark plugs/spark plug boots plus much more.
Prices are fair and postage rates are excellent.
Take a browse and be amazed
Photos taken from the rbmotion website
Here is a set of hand tools which are perfect for adding that touch of realism to
any diorama scene. Made and supplied by vectorcut.com they are beautifully cut and
very well detailed. The process used is laser cut and relief engraved in .0145” laserboard
resulting in very accurate and highly detailed miniatures. Beside the tool set is
a nut/bolt and washer set also very highly detailed and beautifully cut. These are
perfect for detailing engines, prop hubs, undercarriage and many more applications.
FROM VECTOR CUT
Just released are these two sets of very thin washer, my measurements make them at
only 0.28mm thick. The washers come in four sizes, the first set has 2.3mm and 1.9mm
washer, the second set has 1.75mm washers and 1.45mm washers. These washers are laser
cut so have a very clean crisp edge. These washer will mate perfectly with the Vector
Cut nuts to give a completely realistic appearance to your model.
Beautiful hand made laminated wood propellers from Doug Craner in the UK. Doug goes
to extraordinary lengths to make these propellers as accurate in scale, appearance
and colour as possible. The timber he uses has a very tight grain giving a very realistic
Doug will also make propellers on commission for anyone wanting a special one off
ALLEY CAT PILOT FIGURE IN SIDCOT FLYING SUIT
LAMINATED HAND MADE WOOD PROPELLERS
THE MICRO GROUP
THE RELEASE OF THIS NEW RANGE OF HAND MADE LAMINATED WOOD PROPELLERS HAS ADDED A
WHOLE NEW DIMENSION TO WW1 AIRCRAFT MODELING. HAND CRAFTED FROM SELECTED WOODS AND
MANUFACTURED TO EXACTING STANDARDS PUTS THESE PROPELLERS AT THE FOREFRONT OF MUST
HAVE AFTER MARKET ACCESSORIES. A BIG RANGE OF PROPELLER TYPES ARE AVAILABLE WITH
THE CUSTOMER SELECTING THE WOOD COLOURS PREFERRED, THIS ALLOWS THE MODELER TO OBTAIN
A ONE OFF SPECIFIC PROPELLER. THE PROPELLERS ARE MADE IN 1:72, 1:48, 1:32 AND 1:28
SCALES. A FULL REVIEW OF THESE NEW PROPELLERS CAN BE FOUND HERE -REVIEW >>>
THESE PROPELLERS CAN BE PURCHASED DIRECT FROM THE MANUFACTURER AT THE FOLLOWING EMAIL